Cable Jointing, Termination and Pulling
LV and MV joints and terminations built to the kit manufacturer's procedure and tested before energising.
A cable network is as reliable as its weakest joint. ETC jointers follow the manufacturer's instruction step by step and record the tests for every joint and termination.
We work with heat-shrink, cold-shrink and pre-moulded kits from manufacturers including Raychem, 3M, Nexans and Pfisterer, and carry out pulling, laying and the trench works with our own plant.
- Ownership
- 100% Saudi
- Coverage
- Kingdom-wide
- Combined experience
- 20+ years
- Approved vendor registrations
- 23
- Local content
- 46%
- Management system
- ISO 9001 · 14001 · 45001
Scope of Work
Joints
Straight-through, transition and branch joints on single-core and three-core cables.
Terminations
Indoor and outdoor terminations; switchgear and RMU cable boxes, transformers.
Cable pulling and laying
Drum stands and rollers; trench, duct and tray routes.
Testing
Insulation resistance, continuity and phase sequence, with test records.
Repairs
Repair joints and fault restoration.
Trench works
Excavation, barricading and backfill.
What to Send for a Quotation
- Cable type, size and voltage
- Number and type of joints and terminations
- Kit manufacturer, if specified
- Route length and installation method
- Testing and documentation requirements
Send Us Your Scope
Share the BOQ, drawings or a short description. Our team replies with a technical and commercial offer.